Spaulding Life Science 181

View Additional Photos

Getting Here

95 Main Street
Durham, NH 03824
United States

Select Another Facility

How to Reserve a Non-Registrar Owned Classroom

This room is not under the control of the University Registrar's Office. Please contact the department administration for booking availability.

HDMI Connection

Make sure your device is powered on and awake.
Connect your device using the supplied HDMI cable.
If your device requires a display adapter, connect adapter to cable first, then connect adapter to your device.
If necessary, select your desired source connection on the AV Touch Panel.

Panasonic Projector Cart

Power on and log in to laptop
Power projector on using Power button on rear button control panel.
- Projector will take up to 30 seconds to warm up.
Connect the HDMI cable to your laptop.
- If a display adapter is necessary to connect your laptop to the cable, connect the adapter to the cable first, then connect the adapter to your laptop.
Projector will be auto-searching for an active computer signal and should display your computer automatically.
- If needed, use the Input button on projector rear control panel to manually select HDMI connection input.
Projector has built in speakers; your computer will likely select these projector speakers as your Sound Output automatically when connected.
- If necessary, check your laptop’s operating system Sound Output settings to select the projector (“PT FZ-570") as your Sound Output device.
Power projector off using Power button on projector rear button control panel.
- Projector will take up to 30 seconds to cool down before being able to power on again.

Presenting from a Laptop in a Classroom or Learning Space

If your device requires a display adapter to connect to the provided HDMI cable, follow these steps:
1. Connect the HDMI cable to the display adapter.
2. Connect the adapter to your device.
3. Make sure your device is powered on and awake.
  1. Once connected, your laptop display should appear automatically on the classroom system.
    1. If you need a ��‑C–to‑HDMI adapter, �鶹��ý��Ƶ has tested and recommends the which is available from Amazon and other retailers.

�ċ�ċ�ċ�ċNote: If your classroom utilizes a USB-C connection, please connect your laptop directly using the provided ��‑C cable only. Do not use this connection with an adapter, as the ��‑C cable is designed to work with most laptops and adapters can prevent proper display and connectivity.

Select your input source and verify display

If the system does not start automatically, use the AV touch panel to select the appropriate input source:
1. HDMI
2. ��‑C
3. AirMedia
After selecting the input, allow the projector or display time to power on. Your computer’s image should appear on the projection screen; this may take up to 60 seconds.

For more information and detailed Windows and Mac troubleshooting, visit the related .